产品详细

实验中试超高压设备 > S-FL-065-220-09-W超高压处理系统

    S-FL-065-220-09-W超高压处理系统

    S-FL-065-220-09-W超高压处理系统详细说明

    1.容器有效内径:65mm

    2.容器有效内高度:300mm

    3.工作流体介质:水、乙二醇、乙醇、乙醇/蓖麻油

    *4.最大工作压力:900MPa(9000bar, 130500psi)

    5.压力容器构造:Plunger press construction.

    *6.温度控制范围:-20到110度

    7.加热系统:加热循环液体并使其在热交换管道中循环,带有热交换夹套,最高110度

    8.冷却系统:最低-20度

    9.关闭机制:Quick release, semi automatic with hydraulic lift operation "high lift" style

    10.Pre-charge泵系统:Stansted TC10/9512W

    11.Plunger drive泵系统:Stansted TC25/1412H

    12.保压时间:0.1秒到999分钟

    13.卸压系统:2级,全自动手动超控

    14.压力测量:Strain Gauge压力传感器

    15.压力显示和控制:数显带电子控制与传输

    16.温度测量:3个K型热电偶

    17.探针位置:工作区中可自由移动

    18.温度显示:数显带电子传输

    19.温度精确度:±0.5°C

    20.升到最高压力时间:约为3分钟

    21.卸压时间:15S到2000S

    22.逻辑控制器:PLC

    23.样品蓝:铝制

    24.控制台位置:距高压模块约3米

    25.压力模块占地:2.4m * 0.8m;

    26.控制模块占地:0.8m*0.7m

    27.系统重量:约3000KG

    28.电源功率:11KW 

    29.电源:380V 50HZ 3ph N+E

    30.空压机:最小5bar,最大10bar, 每循环消耗为150NL

    *31.停留装置:荧光光谱原位实时监测,dead time在3ms之内

    32.测试:压力测试验证,自增强验证,功能性能验证达到系统说明要求

    Specification Summary

    Vessel Bore (usable):Ø65 mm

    Vessel Length (usable):220 mm1
    Working fluid:Water2
    Max. Working Pressure:900 MPa
    Vessel Construction:Plunger Press Design (vessel with integral HP plunger pump).
    Operating Temperature Range:20°C to + 110°C 3 Heating SystemCirculated fluid (max 120°C),Cooling system Non included in supply, Circulated fluid (min 27°C)
    Closure Handling:Quick release, semiautomatic with hydraulic lift operation "high lift" style
    Priming Pumping System:Stansted TC10/9512W
    Plunger Pumping System:Stansted TC25/1412H
    Dwell at Pressure:0.1 secs 999 minutes
    Decompression System:Two stage, fully with manual override
    Pressure Measurement:Strain Gauge Transducer on drive hydraulics
    Pressure Indicator/Controller:Digital with electronic controller and retransmission
    Temperature measurement:'K' Type thermocouple, 3 Thermocouples ,
    Probe PositionAdjustable in work zone
    Temperature indicator:Digital with electronic retransmission
    Temperature precision:±0.5°C
    Pressurisation Direct:Less than 3 minutes
    Depressurisation:15s to 2000s
    Control Logic:PLC
    Product Basket:Aluminium suspended from closure nut.
    Control Console Positioning:Up to 3m from press module
    Floor Area Press:2.4m (D) x 0.85m (W)
    Floor Area Chiller:1.8m (D) x 1.0m (W)
    Floor Area Console:0,8m x 0.7m
    System Weight:3000 Kg approximately
    Power Consumption:11 kW
    Electrical Supply:380/440V 50 Hz 3ph