产品详细

实验中试超高压设备 > S-FL-850-9-W超高压处理系统

S-FL-850-9-W超高压处理系统

S-FL-850-9-W超高压处理系统详细说明:

1.*内置样品篮有效直径:ø37mm

2.*内置样品篮有效高度:300mm*

3.*工作流体:水, 水/乙二醇,乙醇,乙醇/蓖麻油

4.*最大工作压力:900 MPa (9000 bar, 130,500 psi)

5.*压力腔体构造:双壁高压腔体,柱塞压力构造.

6.温度范围:-20°C 到+90°C

7.加热/制冷系统:热交换夹套.

8.关闭装置:快速释放, 1/8th 转向制动板.

9.预充电式电荷泵:STANSTED AO9512W

10.柱塞驱动泵:STANSTED TC10/1212H

11.达到最大压力时间:约3分钟

12.*缓变率调节:300 MPa /min 到10 MPa/min 升压和降压

13.压力测量:内置压力传感器

14.压力控制:数显式电子控制模块

15.温度测量:'T' 形热电偶 (2 off) 1 个固定资, 1 个可拆卸

16.控制逻辑:PLC (Mitsubishi 'F' series)

17.压力模块占地面积:1.25m x 0.6m

18.重量:380 Kg

19.电压:1 kW

20.电源:400V 3ph 50 Hz(or agreed alternative)

21.空气压缩机:5 barg min, 10 barg max.consumption 150 Nl/cycle

22.冷水/热水循环系统:-10到90度

'FOODLAB' model S-FL-850-9-W Principal Specification

Usable diameter inside product basket:ø37mm

Usable height inside product basket:300mm*

Working fluids:Water, water/glycol, ethanol , ethanol/castor oil

Maximum working pressure:900 MPa (9000 bar, 130,500 psi)

Pressure vessel construction:Duplex barrel, plunger press construction.

Temperature range:-20°C to +90°C

Heating/Cooling system:Circulation of temperature controlled fluid through jacket.(Heating system not included.Cooling system not included.)

Closure mechanism:Quick release, 1/8th turn with locking plate.High lift style

Pre-charge pump:STANSTED AO9512W

Plunger drive pump:STANSTED TC10/1212H

Time to max pressure:3 minutes (approx.)

Ramp Rate adjustment: 300 MPa /min to 10 MPa/min pressurising and decompressing, approximate adjustments.

Pressure measurement:Strain gauge transducer on drive hydraulic circuit calibrated to indicate high pressure

Pressure control:Electronic control module with integral digital display

Temperature Measurement: 'T' type thermocouple (2 off) 1 fixed, 1 demountable**

Control logic:PLC (Mitsubishi 'F' series)

Foot print press module:1.25m x 0.6m

Weight : 380 Kg

Electrical Power:1 kW

Electrical Supply:400V 3ph 50 Hz (or agreed alternative)

Compressed air/gas:5 barg min, 10 barg max.consumption 150 Nl/cycle